2008 Saturn SKY Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Saturn SKY, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 SKY — Year-Specific Fitment Context
The 2008 Saturn SKY is in year 2 of 3 using the 5x110 pattern (2007–2009). Wheels from any 2007–2009 Saturn SKY are cross-compatible with the 2008 model.
Saturn SKY Bolt Pattern by Year
The table below shows how the SKY's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2008 Saturn SKY
For your 2008 Saturn SKY, the 5x110 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The offset is sensitive: stock is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat lugs as specified. Never mix seat types. Re-torque after 50-100 miles. Avoid wheels from non-2007-2009 SKY models; they may not fit.
Historical Fitment Data Reference
In our dataset, Saturn SKY appears from 2007 to 2009 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings for aftermarket wheels to match the 65.1mm bore.
- ✅ Stick to offset within 50-60mm to avoid rubbing fenders or suspension.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Saturn SKY — Frequently Asked Questions
What is the bolt pattern for a 2008 Saturn SKY?
The 2008 Saturn SKY uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 55mm.
What other years of Saturn SKY have the same bolt pattern as the 2008?
The Saturn SKY uses the 5x110 pattern from 2007 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Saturn SKY?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 55mm, and a center bore of at least 65.1mm (using hub rings if larger).
Do 2008 Saturn SKYs use lug bolts or lug nuts?
The 2008 SKY requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2008 Saturn SKY?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Saturn fit my 2008 SKY?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset