2013 smart fortwo electric drive Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 smart fortwo electric drive, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 3x112 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 20-30mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 fortwo electric drive — Year-Specific Fitment Context
The 2013 model year marks the beginning of the smart fortwo electric drive's 3x112 bolt pattern era, which continued through 2018 (6 consecutive years). Wheels from any 2013–2018 smart fortwo electric drive are cross-compatible with the 2013 model.
smart fortwo electric drive Bolt Pattern by Year
The table below shows how the fortwo electric drive's wheel specifications have changed over the years. The 2013 model year is highlighted.
3x112 Pattern Context
This bolt pattern appears on 16 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 3x112:
Expert Buying Guide for 2013 smart fortwo electric drive
For the 2013 smart fortwo electric drive, the bolt pattern is 3x112 with a center bore of 57.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset range is 20-30mm; staying within this range maintains proper suspension geometry and clearance. Always use M12x1.5 lug nuts with the correct seat type (conical or ball seat) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for the vehicle's weight. Wheels from 2013-2018 smart fortwo electric drive models are directly compatible.
Historical Fitment Data Reference
In our dataset, smart fortwo electric drive appears from 2013 to 2018 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 57.1mm without hub-centric rings, as this can cause vibrations.
- ✅ Check offset carefully; offsets outside 20-30mm may cause rubbing on suspension or bodywork.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 smart fortwo electric drive — Frequently Asked Questions
What is the bolt pattern for a 2013 smart fortwo electric drive?
The 2013 smart fortwo electric drive uses a 3x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 20-30mmmm.
What other years of smart fortwo electric drive have the same bolt pattern as the 2013?
The smart fortwo electric drive uses the 3x112 pattern from 2013 through 2018. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What lug nut size does the 2013 smart fortwo electric drive use?
The 2013 smart fortwo electric drive uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2013 smart fortwo electric drive?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2013 smart fortwo electric drive?
Yes, but ensure the wheel spacers match the 3x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Why is matching the 57.1mm center bore important for the 2013 fortwo electric drive?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset