2006 Subaru Baja Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Subaru Baja, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Baja — Year-Specific Fitment Context
The 2006 model year is the final year of the Subaru Baja's 5x100 bolt pattern run (since 2003). Wheels from any 2003–2006 Subaru Baja are cross-compatible with the 2006 model.
Subaru Baja Bolt Pattern by Year
The table below shows how the Baja's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2006 Subaru Baja
For your 2006 Subaru Baja, the bolt pattern is 5x100 with a 56.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 56.1mm bore, preventing vibrations. The factory offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Improper lug nuts can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the Baja's requirements. This final year of the 5x100 pattern shares compatibility with 2003–2006 Bajas.
Historical Fitment Data Reference
In our dataset, Subaru Baja appears from 2003 to 2006 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on hubs.
- ✅ Check brake caliper clearance when using wheels with offset below 45mm, as the Baja's calipers are large.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Subaru Baja — Frequently Asked Questions
What is the bolt pattern for a 2006 Subaru Baja?
The 2006 Subaru Baja uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Baja have the same bolt pattern as the 2006?
The Subaru Baja uses the 5x100 pattern from 2003 through 2006. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the PCD for a 2006 Subaru Baja?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Baja, the PCD is 5x100.
What lug nut size does the 2006 Subaru Baja use?
The 2006 Subaru Baja uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2006 Subaru Baja?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
What is the center bore of a 2006 Subaru Baja?
The factory center bore (hub bore) for the 2006 Subaru Baja is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset