2007 Subaru Forester Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Subaru Forester, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Forester — Year-Specific Fitment Context
The 2007 Subaru Forester is in year 10 of 21 using the 5x100 pattern (1998–2018). Wheels from any 1998–2018 Subaru Forester are cross-compatible with the 2007 model. Across its full production run (1998–2025), the Forester has also used: 5x114.3.
Subaru Forester Bolt Pattern by Year
The table below shows how the Forester's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| ▸ 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x100 | 56.1 | 55 |
| 2017 | 5x100 | 56.1 | 55 |
| 2018 | 5x100 | 56.1 | 48 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
| 2025 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2007 Subaru Forester
For the 2007 Subaru Forester, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a cone seat, while aftermarket may require ball or tapered seats. Mismatched lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Subaru Forester appears from 1998 to 2025 (28 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore (e.g., 73.1mm) to avoid vibration.
- ✅ Stick to offsets between 48-55mm to prevent rubbing on struts or fenders; lower offsets push wheels outward.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles; use a torque wrench to avoid over-tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Subaru Forester — Frequently Asked Questions
What is the bolt pattern for a 2007 Subaru Forester?
The 2007 Subaru Forester uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Forester have the same bolt pattern as the 2007?
The Subaru Forester uses the 5x100 pattern from 1998 through 2018. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the center bore of a 2007 Subaru Forester?
The factory center bore (hub bore) for the 2007 Subaru Forester is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2007 Subaru Forester?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Forester, the PCD is 5x100.
Can I use spacers on my 2007 Subaru Forester?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Do 2007 Subaru Foresters use lug bolts or lug nuts?
The 2007 Forester requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset