1993 Subaru Justy Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Subaru Justy, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 59.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Justy — Year-Specific Fitment Context
The 1993 Subaru Justy is in year 2 of 3 using the 4x100 pattern (1992–1994). Wheels from any 1992–1994 Subaru Justy are cross-compatible with the 1993 model.
Subaru Justy Bolt Pattern by Year
The table below shows how the Justy's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Subaru Justy has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Subaru Justy appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1993 Subaru Justy — Frequently Asked Questions
What is the bolt pattern for a 1993 Subaru Justy?
The 1993 Subaru Justy uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 59.1mm and the offset is 45mm.
What other years of Subaru Justy have the same bolt pattern as the 1993?
The Subaru Justy uses the 4x100 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the center bore of a 1993 Subaru Justy?
The factory center bore (hub bore) for the 1993 Subaru Justy is 59.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 1993 Subaru Justy?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 59.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
How do I measure the bolt pattern on my 1993 Subaru?
The 1993 Justy uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1993 Subaru Justy?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 45mm, and a center bore of at least 59.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Subaru Justy is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Subaru Justy, please report it via our About page contact so we can verify and update this record.