2025 Suzuki KingQuad 400 Fsi Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Suzuki KingQuad 400 Fsi, along with offset and center bore data.
2025 Suzuki KingQuad 400 Fsi Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x110 |
|---|---|
| Lug Nut / Bolt Size | 10x1.25 |
| Center Bore (CB) | Not Applicable mm |
| Offset (ET) | Not Applicable |
| Torque Specs | Not Applicable |
2025 KingQuad 400 Fsi — Year-Specific Fitment Context
The 2025 model year is the final year of the Suzuki KingQuad 400 Fsi's 4x110 bolt pattern run (since 2024). Wheels from any 2024–2025 Suzuki KingQuad 400 Fsi are cross-compatible with the 2025 model.
Suzuki KingQuad 400 Fsi Bolt Pattern by Year
The table below shows how the KingQuad 400 Fsi's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 4x110 | Not Applicable | Not Applicable |
| ▸ 2025 | 4x110 | Not Applicable | Not Applicable |
4x110 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x110:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to Not Applicable, then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2025 Suzuki KingQuad 400 Fsi — Frequently Asked Questions
What is the bolt pattern for a 2025 Suzuki KingQuad 400 Fsi?
The 2025 Suzuki KingQuad 400 Fsi uses a 4x110 bolt pattern (also called lug pattern or PCD). The center bore is Not Applicablemm and the offset is Not Applicablemm.
What other years of Suzuki KingQuad 400 Fsi have the same bolt pattern as the 2025?
The Suzuki KingQuad 400 Fsi uses the 4x110 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 Suzuki KingQuad 400 Fsi?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 KingQuad 400 Fsi, the PCD is 4x110.
How tight should I torque the lug nuts on a 2025 Suzuki KingQuad 400 Fsi?
Refer to your owner's manual for exact specs, but always tighten the 10x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2025 Suzuki KingQuad 400 Fsi?
The OEM offset for the 2025 KingQuad 400 Fsi is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Suzuki?
The 2025 KingQuad 400 Fsi uses a 4x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset