2012 Suzuki Kizashi Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Suzuki Kizashi, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Kizashi — Year-Specific Fitment Context
The 2012 Suzuki Kizashi is in year 3 of 4 using the 5x114.3 pattern (2010–2013). Wheels from any 2010–2013 Suzuki Kizashi are cross-compatible with the 2012 model.
Suzuki Kizashi Bolt Pattern by Year
The table below shows how the Kizashi's wheel specifications have changed over the years. The 2012 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Suzuki Kizashi
For your 2012 Suzuki Kizashi, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree) matching your wheels. Mixing seat types can lead to loosening and wheel detachment. Verify lug nut engagement (at least 6-8 full turns) and torque to manufacturer specs (80-90 ft-lbs).
Historical Fitment Data Reference
In our dataset, Suzuki Kizashi appears from 2010 to 2013 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal lug nuts; they may not seat properly on aftermarket wheels.
- ✅ Check inner clearance for brake calipers when using wheels with lower offset (<40mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Suzuki Kizashi — Frequently Asked Questions
What is the bolt pattern for a 2012 Suzuki Kizashi?
The 2012 Suzuki Kizashi uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Suzuki Kizashi have the same bolt pattern as the 2012?
The Suzuki Kizashi uses the 5x114.3 pattern from 2010 through 2013. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2012 Suzuki Kizashi?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2012 Suzuki Kizashi?
The factory center bore (hub bore) for the 2012 Suzuki Kizashi is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2012 Suzuki?
The 2012 Kizashi uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45mm offset mean for the 2012 Kizashi?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset