2024 VinFast VF 6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 VinFast VF 6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 VF 6 — Year-Specific Fitment Context
The 2024 is the only model year of the VinFast VF 6 in our database using the 5x114.3 bolt pattern.
Fitment Notes
The 2024 VinFast VF 6 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, VinFast VF 6 appears from 2024 to 2024 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2024 VinFast VF 6 — Frequently Asked Questions
What is the bolt pattern for a 2024 VinFast VF 6?
The 2024 VinFast VF 6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
How tight should I torque the lug nuts on a 2024 VinFast VF 6?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2024 VinFast VF 6?
The factory center bore (hub bore) for the 2024 VinFast VF 6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2024 VinFast VF 6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 67.1mm (using hub rings if larger).
Will wheels from another VinFast fit my 2024 VF 6?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 35-45mmmm offset mean for the 2024 VF 6?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your VinFast.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
VinFast VF 6 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2024-2024 (1 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 VinFast VF 6, please report it via our About page contact so we can verify and update this record.