1999 Volkswagen Cabrio Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Volkswagen Cabrio, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1999 Cabrio — Year-Specific Fitment Context
The 1999 Volkswagen Cabrio is in year 5 of 8 using the 4x100 pattern (1995–2002). Wheels from any 1995–2002 Volkswagen Cabrio are cross-compatible with the 1999 model.
Volkswagen Cabrio Bolt Pattern by Year
The table below shows how the Cabrio's wheel specifications have changed over the years. The 1999 model year is highlighted.
Fitment Notes
The 1999 Volkswagen Cabrio has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volkswagen Cabrio appears from 1995 to 2002 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1999 Volkswagen Cabrio — Frequently Asked Questions
What is the bolt pattern for a 1999 Volkswagen Cabrio?
The 1999 Volkswagen Cabrio uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Volkswagen Cabrio have the same bolt pattern as the 1999?
The Volkswagen Cabrio uses the 4x100 pattern from 1995 through 2002. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
What does 35-45mmmm offset mean for the 1999 Cabrio?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Do 1999 Volkswagen Cabrios use lug bolts or lug nuts?
The 1999 Cabrio requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 57.1mm center bore important for the 1999 Cabrio?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1999 Volkswagen Cabrio?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1999 Cabrio, the PCD is 4x100.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volkswagen Cabrio is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2002 (8 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1999 Volkswagen Cabrio, please report it via our About page contact so we can verify and update this record.