1999 Volkswagen Eurovan Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Volkswagen Eurovan, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1999 Eurovan — Year-Specific Fitment Context
The 1999 Volkswagen Eurovan is in year 7 of 11 using the 5x112 pattern (1993–2003). Wheels from any 1993–2003 Volkswagen Eurovan are cross-compatible with the 1999 model.
Volkswagen Eurovan Bolt Pattern by Year
The table below shows how the Eurovan's wheel specifications have changed over the years. The 1999 model year is highlighted.
Fitment Notes
The 1999 Volkswagen Eurovan has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volkswagen Eurovan appears from 1993 to 2003 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
1999 Volkswagen Eurovan — Frequently Asked Questions
What is the bolt pattern for a 1999 Volkswagen Eurovan?
The 1999 Volkswagen Eurovan uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Volkswagen Eurovan have the same bolt pattern as the 1999?
The Volkswagen Eurovan uses the 5x112 pattern from 1993 through 2003. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Do 1999 Volkswagen Eurovans use lug bolts or lug nuts?
The 1999 Eurovan requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 1999 Volkswagen Eurovan?
The factory center bore (hub bore) for the 1999 Volkswagen Eurovan is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1999 Volkswagen Eurovan?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1999 Volkswagen Eurovan use?
The 1999 Volkswagen Eurovan uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volkswagen Eurovan is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1993-2003 (6 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1999 Volkswagen Eurovan, please report it via our About page contact so we can verify and update this record.