2019 Volkswagen Golf Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Volkswagen Golf, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Golf — Year-Specific Fitment Context
The 2019 Volkswagen Golf is in year 15 of 17 using the 5x112 pattern (2005–2021). Wheels from any 2005–2021 Volkswagen Golf are cross-compatible with the 2019 model. Across its full production run (1992–2021), the Golf has also used: 4x100, 5x100.
Volkswagen Golf Bolt Pattern by Year
The table below shows how the Golf's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x100 | 57.1 | 38 |
| 2000 | 5x100 | 57.1 | 38 |
| 2001 | 5x100 | 57.1 | 38 |
| 2002 | 5x100 | 57.1 | 38 |
| 2003 | 5x100 | 57.1 | 38 |
| 2004 | 5x100 | 57.1 | 38 |
| 2005 | 5x112 | 57.1 | 50 |
| 2006 | 5x112 | 57.1 | 50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2011 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| ▸ 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Volkswagen Golf
For your 2019 Volkswagen Golf, the 5x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range of 40-50mm is sensitive; straying outside can cause rubbing or poor handling. Always use lug nuts with the correct 14x1.5 thread pitch and seat type—factory wheels use ball seats, while aftermarket may require conical or ball seats. Mismatched seats can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volkswagen Golf appears from 1992 to 2021 (24 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles of driving.
- ✅ Verify wheel bore diameter; use hub-centric rings if aftermarket bore >57.1mm.
- ✅ Check offset clearance with suspension and fenders; 40-50mm is safe, but lower offsets may require fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Volkswagen Golf — Frequently Asked Questions
What is the bolt pattern for a 2019 Volkswagen Golf?
The 2019 Volkswagen Golf uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Volkswagen Golf have the same bolt pattern as the 2019?
The Volkswagen Golf uses the 5x112 pattern from 2005 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the PCD for a 2019 Volkswagen Golf?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Golf, the PCD is 5x112.
How do I measure the bolt pattern on my 2019 Volkswagen?
The 2019 Golf uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Volkswagen fit my 2019 Golf?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
How tight should I torque the lug nuts on a 2019 Volkswagen Golf?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset