1994 Volkswagen Jetta III Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Volkswagen Jetta III, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Jetta III — Year-Specific Fitment Context
The 1994 Volkswagen Jetta III is in year 2 of 3 using the 4x100 pattern (1993–1995). Wheels from any 1993–1995 Volkswagen Jetta III are cross-compatible with the 1994 model.
Volkswagen Jetta III Bolt Pattern by Year
The table below shows how the Jetta III's wheel specifications have changed over the years. The 1994 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1994 Volkswagen Jetta III
For your 1994 Volkswagen Jetta III, the bolt pattern is 4x100 with a 57.1mm center bore. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. The offset is critical: stock is 38mm, but a range of 35-42mm is acceptable. Going too low (e.g., 30mm) risks rubbing on fenders; too high (e.g., 45mm) may contact suspension. Always use 12x1.5 lug nuts with the correct seat—cone seat (60-degree) for steel wheels, ball seat for factory alloys. Never mix seat types. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volkswagen Jetta III appears from 1993 to 1995 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 89 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore is ≥57.1mm and use hub-centric rings.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug bolts are long enough for full thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Volkswagen Jetta III — Frequently Asked Questions
What is the bolt pattern for a 1994 Volkswagen Jetta III?
The 1994 Volkswagen Jetta III uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 38mm.
What other years of Volkswagen Jetta III have the same bolt pattern as the 1994?
The Volkswagen Jetta III uses the 4x100 pattern from 1993 through 1995. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the PCD for a 1994 Volkswagen Jetta III?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Jetta III, the PCD is 4x100.
What does 38mm offset mean for the 1994 Jetta III?
An offset of 38mm means the wheel's mounting surface is 38mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
How tight should I torque the lug nuts on a 1994 Volkswagen Jetta III?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Volkswagen fit my 1994 Jetta III?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset