2026 Volvo B13R Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo B13R is 10x335. It has a center bore of 281.2 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Volvo B13R Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x335 |
|---|---|
| Center Bore (Hub Bore) | 281.2 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 B13R — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo B13R's 10x335 bolt pattern run (since 2024). Wheels from any 2024–2026 Volvo B13R are cross-compatible with the 2026 model.
Volvo B13R Bolt Pattern by Year
Looking for all generations? View the complete Volvo B13R (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the B13R's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo B13R Wheel Interchange & Donor Fitment Guide (10x335)
The 10x335 bolt pattern is shared by 23 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Volvo B13R, donor rims must match the 10x335 PCD and have a center bore of at least 281.2 mm:
DIRECT HUB MATCH Same 10x335 Pattern & Exact 281.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Volvo B7R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B8R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo B9R | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo FE | 281.2 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo B12B | 281.2 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo B12M | 281.2 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo B13R — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo B13R?
The 2026 Volvo B13R uses a 10x335 bolt pattern (also called lug pattern or PCD). The center bore is 281.2mm and the offset is Not Applicablemm.
What other years of Volvo B13R have the same bolt pattern as the 2026?
The Volvo B13R uses the 10x335 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What does Not Applicablemm offset mean for the 2026 B13R?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Can I use spacers on my 2026 Volvo B13R?
Yes, but ensure the wheel spacers match the 10x335 bolt pattern and 281.2mm center bore. Also verify that you have enough thread engagement for your M22x1.5 hardware.
How tight should I torque the lug nuts on a 2026 Volvo B13R?
Refer to your owner's manual for exact specs, but always tighten the M22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2026 Volvo B13R?
The factory center bore (hub bore) for the 2026 Volvo B13R is 281.2mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →