2026 Acura TLX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Acura TLX is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 40-50, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 94 ft-lbs (127 Nm).
2026 Acura TLX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 94 ft-lbs (127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 TLX — Year-Specific Fitment Context
The 2026 model year is the final year of the Acura TLX's 5x114.3 bolt pattern run (since 2015). Wheels from any 2015–2026 Acura TLX are cross-compatible with the 2026 model.
Acura TLX Bolt Pattern by Year
Looking for all generations? View the complete Acura TLX (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the TLX's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Acura TLX Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Acura TLX, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2005 Honda Accord | 64.1 mm (Exact) | 52 | N 12x1.50 (Ball) |
| 2024 Honda Accord Hybrid | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2005 Honda Civic | 64.1 mm (Exact) | 55 | N 12x1.50 (Ball) |
| 2025 Honda Civic Si | 64.1 mm (Exact) | 40 | 12x1.5 (Ball) |
| 2018 Honda Civic Type R | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2019 Honda Clarity Electric | 64.1 mm (Exact) | 35-45mm | M12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Ferrari Purosangue | 67.1 mm | 67.1mm → 64.1mm |
Not Applicable |
| 2025 Ferrari Roma | 67.1 mm | 67.1mm → 64.1mm |
45 |
| 2025 Ferrari SF90 | 67.1 mm | 67.1mm → 64.1mm |
45 |
| 2024 Fisker Ocean | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 1994 Ford Explorer | 87.1 mm | 87.1mm → 64.1mm |
44 |
| 1993 Ford Mustang | 70.3 mm | 70.3mm → 64.1mm |
30 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 94 ft-lbs (127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Acura TLX — Frequently Asked Questions
What is the bolt pattern for a 2026 Acura TLX?
The 2026 Acura TLX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 40-50mm.
What other years of Acura TLX have the same bolt pattern as the 2026?
The Acura TLX uses the 5x114.3 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Acura TLX?
The OEM offset for the 2026 TLX is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2026 Acura TLX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the PCD for a 2026 Acura TLX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 TLX, the PCD is 5x114.3.
What lug nut size does the 2026 Acura TLX use?
The 2026 Acura TLX uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →