2025 Ferrari Purosangue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Ferrari Purosangue, along with offset and center bore data.
2025 Ferrari Purosangue Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | Not Applicable |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Purosangue — Year-Specific Fitment Context
The 2025 model year is the final year of the Ferrari Purosangue's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2025 Ferrari Purosangue are cross-compatible with the 2025 model.
Ferrari Purosangue Bolt Pattern by Year
The table below shows how the Purosangue's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 5x114.3 | 67.1 | Not Applicable |
| ▸ 2025 | 5x114.3 | 67.1 | Not Applicable |
5x114.3 Pattern Context
This bolt pattern appears on 3207 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to Not Applicable, then re-check torque after 50-100 km (30-60 miles).
2025 Ferrari Purosangue — Frequently Asked Questions
What is the bolt pattern for a 2025 Ferrari Purosangue?
The 2025 Ferrari Purosangue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.
What other years of Ferrari Purosangue have the same bolt pattern as the 2025?
The Ferrari Purosangue uses the 5x114.3 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Ferrari Purosangue use?
The 2025 Ferrari Purosangue uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 67.1mm center bore important for the 2025 Purosangue?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Ferrari Purosangue?
The OEM offset for the 2025 Purosangue is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Ferrari Purosangue?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset