2011 Audi A4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Audi A4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 A4 — Year-Specific Fitment Context
The 2011 Audi A4 is in year 16 of 29 using the 5x112 pattern (1996–2024). Wheels from any 1996–2024 Audi A4 are cross-compatible with the 2011 model.
Audi A4 Bolt Pattern by Year
The table below shows how the A4's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x112 | 57.1 | 45 |
| 1997 | 5x112 | 57.1 | 45 |
| 1998 | 5x112 | 57.1 | 45 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| ▸ 2011 | 5x112 | 66.6 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2017 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2011 Audi A4
For your 2011 Audi A4, the 5x112 bolt pattern is shared across many Audi models, but critical dimensions must match. The center bore is 66.6mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive: stock is 45mm, but a range of 35-50mm is acceptable. Going too low (e.g., 30mm) may cause rubbing on fenders; too high (55mm) risks brake caliper clearance. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Audi uses ball seats, not conical. Mismatched seats can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Audi A4 appears from 1996 to 2024 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.6mm and outer diameter matches wheel bore.
- ✅ Avoid wheels with offset below 35mm on lowered suspensions to prevent fender rubbing.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Audi A4 — Frequently Asked Questions
What is the bolt pattern for a 2011 Audi A4?
The 2011 Audi A4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 45mm.
What other years of Audi A4 have the same bolt pattern as the 2011?
The Audi A4 uses the 5x112 pattern from 1996 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the factory wheel offset for a 2011 Audi A4?
The OEM offset for the 2011 A4 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2011 Audi A4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 A4, the PCD is 5x112.
Will wheels from another Audi fit my 2011 A4?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
What is the center bore of a 2011 Audi A4?
The factory center bore (hub bore) for the 2011 Audi A4 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset