1997 Audi A4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Audi A4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1997 A4 — Year-Specific Fitment Context
The 1997 Audi A4 is in year 2 of 29 using the 5x112 pattern (1996–2024). Wheels from any 1996–2024 Audi A4 are cross-compatible with the 1997 model.
Audi A4 Bolt Pattern by Year
The table below shows how the A4's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x112 | 57.1 | 45 |
| ▸ 1997 | 5x112 | 57.1 | 45 |
| 1998 | 5x112 | 57.1 | 45 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| 2011 | 5x112 | 66.6 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2017 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1997 Audi A4
For your 1997 Audi A4, the critical center bore is 57.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset is sensitive; the factory spec is 45mm, but a range of 35-50mm is acceptable. Going outside this range may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for OEM wheels, cone seat for most aftermarket). Mismatched seats can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Audi A4 appears from 1996 to 2024 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 57.1mm center bore.
- ✅ Check for brake caliper clearance, especially with low-offset wheels, as the 1997 A4 has tight tolerances.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Audi A4 — Frequently Asked Questions
What is the bolt pattern for a 1997 Audi A4?
The 1997 Audi A4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Audi A4 have the same bolt pattern as the 1997?
The Audi A4 uses the 5x112 pattern from 1996 through 2024. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What is the PCD for a 1997 Audi A4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 A4, the PCD is 5x112.
What does 45mm offset mean for the 1997 A4?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Can I use spacers on my 1997 Audi A4?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Can I put aftermarket wheels on my 1997 Audi A4?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 45mm, and a center bore of at least 57.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset