2024 Audi RS 3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Audi RS 3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 RS 3 — Year-Specific Fitment Context
The 2024 model year is the final year of the Audi RS 3's 5x112 bolt pattern run (since 2017). Wheels from any 2017–2024 Audi RS 3 are cross-compatible with the 2024 model.
Audi RS 3 Bolt Pattern by Year
The table below shows how the RS 3's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Audi RS 3
For the 2024 Audi RS 3, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load transfer. The offset range of 30-45mm is sensitive: lower offsets (30-35mm) provide a flush look but may increase bearing load; higher offsets (40-45mm) offer more clearance. Always verify lug nut thread pitch (14x1.5) and seat type—Audi uses ball seat, not cone. Using incorrect lug nuts can cause wheel loosening. Safety first: never exceed the recommended offset range.
Historical Fitment Data Reference
In our dataset, Audi RS 3 appears from 2017 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 75.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless hub-centric and paired with extended studs; they can alter offset and stress bearings.
- ✅ Verify wheel clearance with the brake calipers—2024 RS 3 has large brakes; some aftermarket wheels may require spacers.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Audi RS 3 — Frequently Asked Questions
What is the bolt pattern for a 2024 Audi RS 3?
The 2024 Audi RS 3 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi RS 3 have the same bolt pattern as the 2024?
The Audi RS 3 uses the 5x112 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Audi RS 3 use?
The 2024 Audi RS 3 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2024 Audi?
The 2024 RS 3 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2024 Audi RS 3?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2024 Audi RS 3?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 RS 3, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset