2025 Audi Q4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi Q4 is 5x112. It has a center bore of 57.1 mm, an offset range of 40-50, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi Q4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 57.1 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 Q4 — Year-Specific Fitment Context
The 2025 model year is the final year of the Audi Q4's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2025 Audi Q4 are cross-compatible with the 2025 model.
Audi Q4 Bolt Pattern by Year
The table below shows how the Q4's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 5x112 | 57.1 | 40-45 |
| ▸ 2025 | 5x112 | 57.1 | 40-50 |
2025 Audi Q4 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1652 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi Q4, donor rims must match the 5x112 PCD and have a center bore of at least 57.1 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 57.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2010 Lamborghini Gallardo | 57.1 mm (Exact) | 42 front, 55 rear | B 14x1.50 (Cone) |
| 2015 Lamborghini Huracan | 57.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2024 Lamborghini Revuelto | 57.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2017 McLaren 570GT | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Ball) |
| 2016 McLaren 570S | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Cone) |
| 2019 McLaren 600LT | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Ball) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Maybach 57 | 66.6 mm | 66.6mm → 57.1mm |
30-40mm |
| 2005 Maybach 62 | 66.6 mm | 66.6mm → 57.1mm |
30-40mm |
| 2024 McLaren 750S | 66.5 mm | 66.5mm → 57.1mm |
Front: +32mm, Rear: +40mm |
| 1992 Mercedes-Benz 190 E | 66.6 mm | 66.6mm → 57.1mm |
49 |
| 1992 Mercedes-Benz 300 CE | 66.6 mm | 66.6mm → 57.1mm |
30-50 |
| 1992 Mercedes-Benz 300 D | 66.6 mm | 66.6mm → 57.1mm |
30-50 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Audi Q4 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi Q4?
The 2025 Audi Q4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Audi Q4 have the same bolt pattern as the 2025?
The Audi Q4 uses the 5x112 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What does 40-50mm offset mean for the 2025 Q4?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Can I put aftermarket wheels on my 2025 Audi Q4?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 40-50mm, and a center bore of at least 57.1mm (using hub rings if larger).
What is the factory wheel offset for a 2025 Audi Q4?
The OEM offset for the 2025 Q4 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Audi?
The 2025 Q4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →