2024 Audi Q4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Audi Q4 is 5x112. It has a center bore of 57.1 mm, an offset range of 40-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2024 Audi Q4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 57.1 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2024 Q4 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Audi Q4's 5x112 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Audi Q4 are cross-compatible with the 2024 model.
Audi Q4 Bolt Pattern by Year
Looking for all generations? View the complete Audi Q4 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Q4's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Audi Q4 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2024 Audi Q4, donor rims must match the 5x112 PCD and have a center bore of at least 57.1 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 57.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 Volkswagen Arteon | 57.1 mm (Exact) | 35-45mm | M14x1.5 (Ball) |
| 2025 Volkswagen Atlas | 57.1 mm (Exact) | 34-40 | 14x1.5 (Ball) |
| 2025 Volkswagen Atlas Cross Sport | 57.1 mm (Exact) | 34-38 | 14x1.5 (Ball) |
| 2019 Volkswagen Beetle | 57.1 mm (Exact) | 50 | 14x1.5 (Ball) |
| 2017 Volkswagen CC | 57.1 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2019 Volkswagen e-Golf | 57.1 mm (Exact) | 40-50 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Mercedes-Benz GLE-Class | 66.6 mm | 66.6mm → 57.1mm |
40-50 |
| 2015 Mercedes-Benz GLK-Class | 66.5 mm | 66.5mm → 57.1mm |
48 |
| 2019 Mercedes-Benz GLS | 66.6 mm | 66.6mm → 57.1mm |
30-50 |
| 2025 Mercedes-Benz GLS-Class | 66.6 mm | 66.6mm → 57.1mm |
35-45 |
| 2015 Mercedes-Benz M-Class | 66.6 mm | 66.6mm → 57.1mm |
55 |
| 2021 Mercedes-Benz Mercedes-AMG A-Class | 66.5 mm | 66.5mm → 57.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Audi Q4 — Frequently Asked Questions
What is the bolt pattern for a 2024 Audi Q4?
The 2024 Audi Q4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-45mm.
What other years of Audi Q4 have the same bolt pattern as the 2024?
The Audi Q4 uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Audi Q4 use?
The 2024 Audi Q4 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2024 Audi Q4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Q4, the PCD is 5x112.
Will wheels from another Audi fit my 2024 Q4?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What is the center bore of a 2024 Audi Q4?
The factory center bore (hub bore) for the 2024 Audi Q4 is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →