2019 BMW M6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 BMW M6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 M6 — Year-Specific Fitment Context
The 2019 is the only model year of the BMW M6 in our database using the 5x112 bolt pattern. Note: the 2018 model used a different pattern (5x120), so its wheels are NOT interchangeable with the 2019. Across its full production run (2006–2019), the M6 has also used: 5x120.
BMW M6 Bolt Pattern by Year
The table below shows how the M6's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x120 | 72.56 | 30-40 |
| 2007 | 5x120 | 72.56 | 30-40 |
| 2008 | 5x120 | 72.56 | 30-40 |
| 2009 | 5x120 | 72.56 | 30-40 |
| 2010 | 5x120 | 72.56 | 30-40 |
| 2012 | 5x120 | 72.56 | 30-40 |
| 2013 | 5x120 | 72.56 | 30-40 |
| 2014 | 5x120 | 72.56 | 30-40 |
| 2015 | 5x120 | 72.56 | 30-40 |
| 2016 | 5x120 | 72.56 | 30-40 |
| 2017 | 5x120 | 72.56 | 30-40 |
| 2018 | 5x120 | 72.56 | 30-40 |
| ▸ 2019 | 5x112 | 66.6 | 25-40 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 BMW M6
For the 2019 BMW M6, the bolt pattern is 5x112 with a center bore of 66.6mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations. The offset range is 25-40mm; staying within this range maintains proper suspension geometry and clearance. Always use lug nuts with the correct thread pitch (14x1.25) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Mismatched seats can cause wheel loosening. Note: 2018 M6 wheels (5x120) are not compatible. Verify all specifications before purchase.
Historical Fitment Data Reference
In our dataset, BMW M6 appears from 2006 to 2019 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from earlier M6 models (2006-2018) as they have a 5x120 bolt pattern.
- ✅ Check wheel clearance for large brake calipers; the M6 has high-performance brakes that may require specific spoke designs.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 BMW M6 — Frequently Asked Questions
What is the bolt pattern for a 2019 BMW M6?
The 2019 BMW M6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-40mm.
Can I use 2018 BMW M6 wheels on a 2019?
No. The 2018 M6 used a 5x120 bolt pattern, which differs from the 2019's 5x112. They are not interchangeable.
Will wheels from another BMW fit my 2019 M6?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I put aftermarket wheels on my 2019 BMW M6?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 25-40mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the center bore of a 2019 BMW M6?
The factory center bore (hub bore) for the 2019 BMW M6 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2019 BMW M6?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 M6, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset