2017 BMW M6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 BMW M6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 72.56 mm |
| Offset (ET) | 30-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 M6 — Year-Specific Fitment Context
The 2017 BMW M6 is in year 12 of 13 using the 5x120 pattern (2006–2018). Wheels from any 2006–2018 BMW M6 are cross-compatible with the 2017 model. Across its full production run (2006–2019), the M6 has also used: 5x112.
BMW M6 Bolt Pattern by Year
The table below shows how the M6's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x120 | 72.56 | 30-40 |
| 2007 | 5x120 | 72.56 | 30-40 |
| 2008 | 5x120 | 72.56 | 30-40 |
| 2009 | 5x120 | 72.56 | 30-40 |
| 2010 | 5x120 | 72.56 | 30-40 |
| 2012 | 5x120 | 72.56 | 30-40 |
| 2013 | 5x120 | 72.56 | 30-40 |
| 2014 | 5x120 | 72.56 | 30-40 |
| 2015 | 5x120 | 72.56 | 30-40 |
| 2016 | 5x120 | 72.56 | 30-40 |
| ▸ 2017 | 5x120 | 72.56 | 30-40 |
| 2018 | 5x120 | 72.56 | 30-40 |
| 2019 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2017 BMW M6
For your 2017 BMW M6, the bolt pattern is 5x120 with a center bore of 72.56mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the exact bore; otherwise, vibrations may occur. The offset range is 30-40mm; staying within this range prevents rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (14x1.25) and proper seat type—BMW typically uses ball seats, but some aftermarket wheels require conical seats. Mismatched lug nuts can lead to wheel loosening. Cross-compatible wheels from 2006–2018 M6 models fit, but avoid 5x112 pattern wheels without adapters.
Historical Fitment Data Reference
In our dataset, BMW M6 appears from 2006 to 2019 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify that aftermarket wheels have a center bore larger than 72.56mm to allow for hub-centric rings.
- ✅ Check for caliper clearance, especially with 20-inch wheels or aggressive offsets near 30mm.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 BMW M6 — Frequently Asked Questions
What is the bolt pattern for a 2017 BMW M6?
The 2017 BMW M6 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.56mm and the offset is 30-40mm.
What other years of BMW M6 have the same bolt pattern as the 2017?
The BMW M6 uses the 5x120 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 BMW M6?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2017 BMW M6s use lug bolts or lug nuts?
The 2017 M6 requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2017 BMW M6?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.56mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
How do I measure the bolt pattern on my 2017 BMW?
The 2017 M6 uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset