2016 BMW M6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 BMW M6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 72.56 mm |
| Offset (ET) | 30-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 M6 — Year-Specific Fitment Context
The 2016 BMW M6 is in year 11 of 13 using the 5x120 pattern (2006–2018). Wheels from any 2006–2018 BMW M6 are cross-compatible with the 2016 model. Across its full production run (2006–2019), the M6 has also used: 5x112.
BMW M6 Bolt Pattern by Year
The table below shows how the M6's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x120 | 72.56 | 30-40 |
| 2007 | 5x120 | 72.56 | 30-40 |
| 2008 | 5x120 | 72.56 | 30-40 |
| 2009 | 5x120 | 72.56 | 30-40 |
| 2010 | 5x120 | 72.56 | 30-40 |
| 2012 | 5x120 | 72.56 | 30-40 |
| 2013 | 5x120 | 72.56 | 30-40 |
| 2014 | 5x120 | 72.56 | 30-40 |
| 2015 | 5x120 | 72.56 | 30-40 |
| ▸ 2016 | 5x120 | 72.56 | 30-40 |
| 2017 | 5x120 | 72.56 | 30-40 |
| 2018 | 5x120 | 72.56 | 30-40 |
| 2019 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2016 BMW M6
For the 2016 BMW M6, the correct bolt pattern is 5x120 with a center bore of 72.56mm. When selecting aftermarket wheels, hub-centric rings are essential to ensure the wheel is centered on the hub, preventing vibrations and load stress. The offset range is tight at 30-40mm; deviating can cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct thread pitch (14x1.25) and seat type—BMW typically uses ball seats, but aftermarket wheels may require conical or tapered seats. Mismatched seats can lead to loose wheels and catastrophic failure. Verify compatibility with your specific M6 variant (coupe, convertible, or Gran Coupe) as brake caliper clearance may vary.
Historical Fitment Data Reference
In our dataset, BMW M6 appears from 2006 to 2019 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using spacers unless necessary; if used, ensure extended lug bolts are hub-centric and properly torqued.
- ✅ Check for brake caliper clearance with aftermarket wheels, especially on the front axle, as the M6 has large brakes.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 BMW M6 — Frequently Asked Questions
What is the bolt pattern for a 2016 BMW M6?
The 2016 BMW M6 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.56mm and the offset is 30-40mm.
What other years of BMW M6 have the same bolt pattern as the 2016?
The BMW M6 uses the 5x120 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Do 2016 BMW M6s use lug bolts or lug nuts?
The 2016 M6 requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2016 BMW M6?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 M6, the PCD is 5x120.
What is the factory wheel offset for a 2016 BMW M6?
The OEM offset for the 2016 M6 is typically around 30-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2016 BMW M6 use?
The 2016 BMW M6 uses 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset