2011 Audi S4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Audi S4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 S4 — Year-Specific Fitment Context
The 2011 Audi S4 is in year 20 of 33 using the 5x112 pattern (1992–2024). Wheels from any 1992–2024 Audi S4 are cross-compatible with the 2011 model.
Audi S4 Bolt Pattern by Year
The table below shows how the S4's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x112 | 57.1 | 45 |
| 1993 | 5x112 | 57.1 | 45 |
| 1994 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| ▸ 2011 | 5x112 | 66.6 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2011 Audi S4
For your 2011 Audi S4, the 5x112 bolt pattern is shared across 1992–2024 models, ensuring broad cross-compatibility. However, the 66.6mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory spec is 45mm, but a range of 35–50mm is typical for proper clearance. Deviating too far can cause rubbing or poor handling. Always verify lug nut thread pitch (14x1.50) and seat type—Audi uses ball seats, not conical. Using incorrect lug nuts can lead to wheel loosening. Safety first: consult a professional for fitment verification.
Historical Fitment Data Reference
In our dataset, Audi S4 appears from 1992 to 2024 (26 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings (66.6mm ID to wheel's CB) to avoid steering wheel vibration.
- ✅ Check inner clearance for brake calipers; some aftermarket wheels may require spacers to clear the S4's larger brakes.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Audi S4 — Frequently Asked Questions
What is the bolt pattern for a 2011 Audi S4?
The 2011 Audi S4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 45mm.
What other years of Audi S4 have the same bolt pattern as the 2011?
The Audi S4 uses the 5x112 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 Audi S4?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2011 Audi S4?
The factory center bore (hub bore) for the 2011 Audi S4 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2011 Audi S4s use lug bolts or lug nuts?
The 2011 S4 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2011 Audi S4?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 45mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset