2012 Audi S4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Audi S4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 S4 — Year-Specific Fitment Context
The 2012 Audi S4 is in year 21 of 33 using the 5x112 pattern (1992–2024). Wheels from any 1992–2024 Audi S4 are cross-compatible with the 2012 model.
Audi S4 Bolt Pattern by Year
The table below shows how the S4's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x112 | 57.1 | 45 |
| 1993 | 5x112 | 57.1 | 45 |
| 1994 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| 2011 | 5x112 | 66.6 | 45 |
| ▸ 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2012 Audi S4
The 2012 Audi S4 uses a 5x112 bolt pattern with a 66.6mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—Audi typically uses ball seats, but aftermarket wheels may require conical or shank-style nuts. Improper lug nuts can lead to wheel loosening. For optimal safety, re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Audi S4 appears from 1992 to 2024 (26 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 35mm to prevent fender rubbing.
- ✅ Use hub-centric rings if aftermarket center bore exceeds 66.6mm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Audi S4 — Frequently Asked Questions
What is the bolt pattern for a 2012 Audi S4?
The 2012 Audi S4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 45mm.
What other years of Audi S4 have the same bolt pattern as the 2012?
The Audi S4 uses the 5x112 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Audi S4?
The OEM offset for the 2012 S4 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 66.6mm center bore important for the 2012 S4?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2012 Audi?
The 2012 S4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2012 Audi S4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 S4, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset