2026 Audi S4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi S4 is 5x112. It has a center bore of 66.5 mm, an offset range of 40, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi S4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 S4 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi S4's 5x112 bolt pattern run (since 1992). Wheels from any 1992–2026 Audi S4 are cross-compatible with the 2026 model.
Audi S4 Bolt Pattern by Year
Looking for all generations? View the complete Audi S4 (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the S4's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x112 | 57.1 | 45 |
| 1993 | 5x112 | 57.1 | 45 |
| 1994 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| 2011 | 5x112 | 57.1 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.6 | 30-45 |
| 2019 | 5x112 | 66.6 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.6 | 30-45 |
| 2022 | 5x112 | 66.6 | 30-45 |
| 2023 | 5x112 | 66.6 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
| 2025 | 5x112 | 66.5 | 40 |
| ▸ 2026 | 5x112 | 66.5 | 40 |
2026 Audi S4 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi S4, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Audi RS e-tron GT | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi RS Q8 | 66.5 mm (Exact) | 25-35 | 14x1.5 (Ball) |
| 2025 Audi S e-tron GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Audi S3 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2022 Audi S5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2013 Audi S6 | 66.6 mm (Exact) | 42 | B 14x1.50 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi S4 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi S4?
The 2026 Audi S4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 40mm.
What other years of Audi S4 have the same bolt pattern as the 2026?
The Audi S4 uses the 5x112 pattern from 1992 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Audi?
The 2026 S4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2026 Audi S4?
The OEM offset for the 2026 S4 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2026 Audi S4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 S4, the PCD is 5x112.
What is the center bore of a 2026 Audi S4?
The factory center bore (hub bore) for the 2026 Audi S4 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →