2007 Audi S4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Audi S4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 S4 — Year-Specific Fitment Context
The 2007 Audi S4 is in year 16 of 33 using the 5x112 pattern (1992–2024). Wheels from any 1992–2024 Audi S4 are cross-compatible with the 2007 model.
Audi S4 Bolt Pattern by Year
The table below shows how the S4's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x112 | 57.1 | 45 |
| 1993 | 5x112 | 57.1 | 45 |
| 1994 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| ▸ 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| 2011 | 5x112 | 66.6 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2007 Audi S4
The 2007 Audi S4 uses a 5x112 bolt pattern with a 57.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical; the factory offset is 45mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 14x1.50, and the seat type must match—Audi typically uses ball seats, but aftermarket wheels may require conical or ball-seat lug nuts. Mismatched seating can lead to wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi S4 appears from 1992 to 2024 (26 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles, then periodically check.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel bearings.
- ✅ For lowered S4s, offsets below 40mm may require fender rolling to prevent rubbing.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Audi S4 — Frequently Asked Questions
What is the bolt pattern for a 2007 Audi S4?
The 2007 Audi S4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Audi S4 have the same bolt pattern as the 2007?
The Audi S4 uses the 5x112 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Audi S4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 S4, the PCD is 5x112.
Do 2007 Audi S4s use lug bolts or lug nuts?
The 2007 S4 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2007 Audi?
The 2007 S4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2007 Audi S4?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset