2019 Audi S4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Audi S4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 S4 — Year-Specific Fitment Context
The 2019 Audi S4 is in year 28 of 33 using the 5x112 pattern (1992–2024). Wheels from any 1992–2024 Audi S4 are cross-compatible with the 2019 model.
Audi S4 Bolt Pattern by Year
The table below shows how the S4's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x112 | 57.1 | 45 |
| 1993 | 5x112 | 57.1 | 45 |
| 1994 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45 |
| 2007 | 5x112 | 57.1 | 45 |
| 2008 | 5x112 | 57.1 | 45 |
| 2009 | 5x112 | 57.1 | 45 |
| 2010 | 5x112 | 66.6 | 45 |
| 2011 | 5x112 | 66.6 | 45 |
| 2012 | 5x112 | 66.6 | 45 |
| 2013 | 5x112 | 66.6 | 45 |
| 2014 | 5x112 | 66.6 | 45 |
| 2015 | 5x112 | 66.6 | 45 |
| 2016 | 5x112 | 66.6 | 45 |
| 2018 | 5x112 | 66.5 | 30-45 |
| ▸ 2019 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Audi S4
The 2019 Audi S4 uses a 5x112 bolt pattern with a 66.5mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 30-45mm; deviations risk rubbing or clearance issues with brakes and suspension. Always use lug nuts with 14x1.5 thread pitch and the correct seat type—Audi typically uses ball seats, but aftermarket wheels may require conical (60-degree) or ball seats. Mismatched seats can cause wheel loosening. Verify lug nut engagement (at least 6-8 full turns) and torque to manufacturer specs (90 ft-lbs). Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi S4 appears from 1992 to 2024 (26 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are aluminum or plastic and properly seated to avoid vibrations.
- ✅ Check brake caliper clearance with new wheels; some aftermarket designs may require spacers or offset adjustments.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Audi S4 — Frequently Asked Questions
What is the bolt pattern for a 2019 Audi S4?
The 2019 Audi S4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi S4 have the same bolt pattern as the 2019?
The Audi S4 uses the 5x112 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Audi S4s use lug bolts or lug nuts?
The 2019 S4 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2019 Audi S4 use?
The 2019 Audi S4 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2019 Audi?
The 2019 S4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2019 Audi S4?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-45mm, and a center bore of at least 66.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset