1995 Audi Cabriolet Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Audi Cabriolet, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1995 Cabriolet — Year-Specific Fitment Context
The 1995 Audi Cabriolet is in year 2 of 5 using the 5x112 pattern (1994–1998). Wheels from any 1994–1998 Audi Cabriolet are cross-compatible with the 1995 model.
Audi Cabriolet Bolt Pattern by Year
The table below shows how the Cabriolet's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1995 Audi Cabriolet
For your 1995 Audi Cabriolet, the 5x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 14x1.5 thread pitch with a ball seat (factory) or conical seat (aftermarket). Mixing seat types can lead to loose wheels. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi Cabriolet appears from 1994 to 1998 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 57.1mm.
- ✅ Avoid spacers without extended studs; verify offset stays within 40-50mm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Audi Cabriolet — Frequently Asked Questions
What is the bolt pattern for a 1995 Audi Cabriolet?
The 1995 Audi Cabriolet uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Audi Cabriolet have the same bolt pattern as the 1995?
The Audi Cabriolet uses the 5x112 pattern from 1994 through 1998. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1995 Audi Cabriolet?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 57.1mm center bore important for the 1995 Cabriolet?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 1995 Audi Cabriolet?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Will wheels from another Audi fit my 1995 Cabriolet?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset