2025 Audi Q3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Audi Q3, along with offset and center bore data.
2025 Audi Q3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 103 ft-lbs (140 Nm) |
2025 Q3 — Year-Specific Fitment Context
The 2025 model year is the final year of the Audi Q3's 5x112 bolt pattern run (since 2015). Wheels from any 2015–2025 Audi Q3 are cross-compatible with the 2025 model.
Audi Q3 Bolt Pattern by Year
The table below shows how the Q3's wheel specifications have changed over the years. The 2025 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1661 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x112:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Audi Q3 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi Q3?
The 2025 Audi Q3 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mm.
What other years of Audi Q3 have the same bolt pattern as the 2025?
The Audi Q3 uses the 5x112 pattern from 2015 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Why is matching the 57.1mm center bore important for the 2025 Q3?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Audi Q3?
The OEM offset for the 2025 Q3 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Audi Q3?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2025 Audi?
The 2025 Q3 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset