2019 Audi Q3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Audi Q3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Q3 — Year-Specific Fitment Context
The 2019 Audi Q3 is in year 5 of 10 using the 5x112 pattern (2015–2024). Wheels from any 2015–2024 Audi Q3 are cross-compatible with the 2019 model.
Audi Q3 Bolt Pattern by Year
The table below shows how the Q3's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Audi Q3
For your 2019 Audi Q3, the 5x112 bolt pattern is shared with 2015-2024 models, but the 66.5mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations. Offset must stay within 30-45mm; deviations risk rubbing or poor handling. Always use 14x1.5 lug nuts with the correct seat type: Audi uses ball seat (radius), not conical. Mixing seat types can cause wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and torque to 120 Nm (89 lb-ft).
Historical Fitment Data Reference
In our dataset, Audi Q3 appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 88.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations may damage wheel bearings.
- ✅ Check offset carefully: lower offset (30mm) pushes wheels outward, higher (45mm) tucks them in; test fit to confirm clearance.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Audi Q3 — Frequently Asked Questions
What is the bolt pattern for a 2019 Audi Q3?
The 2019 Audi Q3 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi Q3 have the same bolt pattern as the 2019?
The Audi Q3 uses the 5x112 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 Audi Q3?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-45mm, and a center bore of at least 66.5mm (using hub rings if larger).
What is the factory wheel offset for a 2019 Audi Q3?
The OEM offset for the 2019 Q3 is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2019 Audi Q3?
The factory center bore (hub bore) for the 2019 Audi Q3 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2019 Audi Q3?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset