2018 Audi RS 5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Audi RS 5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 RS 5 — Year-Specific Fitment Context
The 2018 Audi RS 5 is in year 6 of 12 using the 5x112 pattern (2013–2024). Wheels from any 2013–2024 Audi RS 5 are cross-compatible with the 2018 model.
Audi RS 5 Bolt Pattern by Year
The table below shows how the RS 5's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2018 Audi RS 5
For your 2018 Audi RS 5, the bolt pattern is 5x112 with a center bore of 66.5mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to avoid vibrations. The offset range is 30-45mm; staying within this ensures proper clearance and handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Audi typically uses ball seats, but confirm your wheel's specification. Mismatched lug nuts can lead to wheel loss. Safety first: verify all fitment parameters before installation.
Historical Fitment Data Reference
In our dataset, Audi RS 5 appears from 2013 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless necessary; they can alter offset and stress wheel bearings.
- ✅ Check for brake caliper clearance, especially with larger aftermarket wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Audi RS 5 — Frequently Asked Questions
What is the bolt pattern for a 2018 Audi RS 5?
The 2018 Audi RS 5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi RS 5 have the same bolt pattern as the 2018?
The Audi RS 5 uses the 5x112 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the center bore of a 2018 Audi RS 5?
The factory center bore (hub bore) for the 2018 Audi RS 5 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2018 Audi RS 5s use lug bolts or lug nuts?
The 2018 RS 5 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2018 Audi?
The 2018 RS 5 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2018 Audi RS 5?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-45mm, and a center bore of at least 66.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset