2025 Audi RS 5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi RS 5 is 5x112. It has a center bore of 66.5 mm, an offset range of 22-26, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi RS 5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 22-26 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 RS 5 — Year-Specific Fitment Context
The 2025 Audi RS 5 is in year 13 of 14 using the 5x112 pattern (2013–2026). Wheels from any 2013–2026 Audi RS 5 are cross-compatible with the 2025 model.
Audi RS 5 Bolt Pattern by Year
Looking for all generations? View the complete Audi RS 5 (2013–2026) Bolt Pattern & Generation Guide →
The table below shows how the RS 5's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Audi RS 5 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi RS 5, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW 3 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW 330e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 330i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2024 BMW 340i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW 4 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 430i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2014 BMW i3 | 66.7 mm | 66.7mm → 66.5mm |
43 (The car has thin wheels!) |
| 2014 BMW i8 | 66.7 mm | 66.7mm → 66.5mm |
39 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi RS 5 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi RS 5?
The 2025 Audi RS 5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 22-26mm.
What other years of Audi RS 5 have the same bolt pattern as the 2025?
The Audi RS 5 uses the 5x112 pattern from 2013 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Audi RS 5?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2025 Audi RS 5?
The OEM offset for the 2025 RS 5 is typically around 22-26mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2025 Audi RS 5?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 22-26mm, and a center bore of at least 66.5mm (using hub rings if larger).
Will wheels from another Audi fit my 2025 RS 5?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →