2026 Porsche Macan Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Porsche Macan is 5x112. It has a center bore of 66.6 mm, an offset range of 21-39, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 118 ft-lbs (160 Nm).
2026 Porsche Macan Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 21-39 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 118 ft-lbs (160 Nm) |
2026 Macan — Year-Specific Fitment Context
The 2026 model year is the final year of the Porsche Macan's 5x112 bolt pattern run (since 2015). Wheels from any 2015–2026 Porsche Macan are cross-compatible with the 2026 model.
Porsche Macan Bolt Pattern by Year
Looking for all generations? View the complete Porsche Macan (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the Macan's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Porsche Macan Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Porsche Macan, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW X2 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW X3 | 66.6 mm (Exact) | 28 | B 14x1.50 (Cone) |
| 2025 BMW X3 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2020 BMW X4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW X4 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW X5 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 118 ft-lbs (160 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Porsche Macan — Frequently Asked Questions
What is the bolt pattern for a 2026 Porsche Macan?
The 2026 Porsche Macan uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 21-39mm.
What other years of Porsche Macan have the same bolt pattern as the 2026?
The Porsche Macan uses the 5x112 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Porsche Macan?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2026 Porsche Macan?
The OEM offset for the 2026 Macan is typically around 21-39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 21-39mm offset mean for the 2026 Macan?
An offset of 21-39mm means the wheel's mounting surface is 21-39mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Porsche.
Do 2026 Porsche Macans use lug bolts or lug nuts?
The 2026 Macan requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →