2018 Porsche Macan Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Porsche Macan, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 26 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Macan — Year-Specific Fitment Context
The 2018 Porsche Macan is in year 4 of 10 using the 5x112 pattern (2015–2024). Wheels from any 2015–2024 Porsche Macan are cross-compatible with the 2018 model.
Porsche Macan Bolt Pattern by Year
The table below shows how the Macan's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2018 Porsche Macan
For your 2018 Porsche Macan, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration. The factory offset is 26mm; deviations affect handling and clearance. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for OEM, cone seat for many aftermarket). Mismatched seats can cause wheel loosening. Verify offset and bore before purchase.
Historical Fitment Data Reference
In our dataset, Porsche Macan appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 20mm or above 32mm to prevent rubbing or brake clearance issues.
- ✅ Use a torque wrench set to 130 Nm (96 lb-ft) for final tightening; never exceed 140 Nm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Porsche Macan — Frequently Asked Questions
What is the bolt pattern for a 2018 Porsche Macan?
The 2018 Porsche Macan uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 26mm.
What other years of Porsche Macan have the same bolt pattern as the 2018?
The Porsche Macan uses the 5x112 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2018 Porsche Macan?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 26mm, and a center bore of at least 66.5mm (using hub rings if larger).
How do I measure the bolt pattern on my 2018 Porsche?
The 2018 Macan uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Porsche fit my 2018 Macan?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
What is the factory wheel offset for a 2018 Porsche Macan?
The OEM offset for the 2018 Macan is typically around 26mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset