2025 Audi SQ8 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi SQ8 is 5x112. It has a center bore of 66.5 mm, an offset range of 20-30, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi SQ8 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 20-30 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 SQ8 — Year-Specific Fitment Context
The 2025 Audi SQ8 is in year 5 of 6 using the 5x112 pattern (2021–2026). Wheels from any 2021–2026 Audi SQ8 are cross-compatible with the 2025 model.
Audi SQ8 Bolt Pattern by Year
Looking for all generations? View the complete Audi SQ8 (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the SQ8's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Audi SQ8 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi SQ8, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW 228i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW 230i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2019 BMW 3 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW 330e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 330i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2024 BMW 340i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2014 BMW i3 | 66.7 mm | 66.7mm → 66.5mm |
43 (The car has thin wheels!) |
| 2014 BMW i8 | 66.7 mm | 66.7mm → 66.5mm |
39 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi SQ8 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi SQ8?
The 2025 Audi SQ8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 20-30mm.
What other years of Audi SQ8 have the same bolt pattern as the 2025?
The Audi SQ8 uses the 5x112 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2025 Audi?
The 2025 SQ8 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2025 Audi SQ8?
The OEM offset for the 2025 SQ8 is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Audi SQ8?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2025 Audi SQ8?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →