2026 Audi Q5 Sportback Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi Q5 Sportback is 5x112. It has a center bore of 66.5 mm, an offset range of 30-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Audi Q5 Sportback Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 30-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2026 Q5 Sportback — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi Q5 Sportback's 5x112 bolt pattern run (since 2021). Wheels from any 2021–2026 Audi Q5 Sportback are cross-compatible with the 2026 model.
Audi Q5 Sportback Bolt Pattern by Year
Looking for all generations? View the complete Audi Q5 Sportback (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the Q5 Sportback's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Audi Q5 Sportback Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi Q5 Sportback, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW 2 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 228i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW 230i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2019 BMW 3 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW 330e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 330i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
HUB RING FITMENT Same 5x112 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2014 BMW i3 | 66.7 mm | 66.7mm → 66.5mm |
43 (The car has thin wheels!) |
| 2014 BMW i8 | 66.7 mm | 66.7mm → 66.5mm |
39 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi Q5 Sportback — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi Q5 Sportback?
The 2026 Audi Q5 Sportback uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi Q5 Sportback have the same bolt pattern as the 2026?
The Audi Q5 Sportback uses the 5x112 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Audi fit my 2026 Q5 Sportback?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
What is the factory wheel offset for a 2026 Audi Q5 Sportback?
The OEM offset for the 2026 Q5 Sportback is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 Audi Q5 Sportback?
The factory center bore (hub bore) for the 2026 Audi Q5 Sportback is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2026 Audi?
The 2026 Q5 Sportback uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →