2014 Audi Q5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Audi Q5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 39 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 Q5 — Year-Specific Fitment Context
The 2014 Audi Q5 is in year 6 of 16 using the 5x112 pattern (2009–2024). Wheels from any 2009–2024 Audi Q5 are cross-compatible with the 2014 model.
Audi Q5 Bolt Pattern by Year
The table below shows how the Q5's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x112 | 66.5 | 39 |
| 2010 | 5x112 | 66.5 | 39 |
| 2011 | 5x112 | 66.5 | 39 |
| 2012 | 5x112 | 66.5 | 39 |
| 2013 | 5x112 | 66.5 | 39 |
| ▸ 2014 | 5x112 | 66.5 | 39 |
| 2015 | 5x112 | 66.5 | 39 |
| 2016 | 5x112 | 66.5 | 39 |
| 2017 | 5x112 | 66.5 | 39 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.5 | 39 |
| 2020 | 5x112 | 66.5 | 39 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2014 Audi Q5
For your 2014 Audi Q5, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels must have a 66.5mm bore or use hub-centric rings to prevent vibration. The offset is sensitive: stick to 39mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Audi typically uses ball seats; verify your wheels match. Improper lug nuts can cause wheel loss. Safety first: ensure all components are compatible.
Historical Fitment Data Reference
In our dataset, Audi Q5 appears from 2009 to 2024 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using conical seat lug nuts on factory Audi wheels; they require ball seat lug nuts.
- ✅ Check for brake caliper clearance when fitting aftermarket wheels, especially with larger rotors.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Audi Q5 — Frequently Asked Questions
What is the bolt pattern for a 2014 Audi Q5?
The 2014 Audi Q5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 39mm.
What other years of Audi Q5 have the same bolt pattern as the 2014?
The Audi Q5 uses the 5x112 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2014 Audi Q5?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 39mm, and a center bore of at least 66.5mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2014 Audi Q5?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2014 Audi Q5?
The factory center bore (hub bore) for the 2014 Audi Q5 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 39mm offset mean for the 2014 Q5?
An offset of 39mm means the wheel's mounting surface is 39mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset