2026 Audi Q5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi Q5 is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi Q5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 Q5 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi Q5's 5x112 bolt pattern run (since 2009). Wheels from any 2009–2026 Audi Q5 are cross-compatible with the 2026 model.
Audi Q5 Bolt Pattern by Year
Looking for all generations? View the complete Audi Q5 (2009–2026) Bolt Pattern & Generation Guide →
The table below shows how the Q5's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x112 | 66.6 | 39 |
| 2010 | 5x112 | 66.6 | 39 |
| 2011 | 5x112 | 66.6 | 39 |
| 2012 | 5x112 | 66.6 | 39 |
| 2013 | 5x112 | 66.6 | 39 |
| 2014 | 5x112 | 66.6 | 39 |
| 2015 | 5x112 | 66.6 | 39 |
| 2016 | 5x112 | 66.6 | 39 |
| 2017 | 5x112 | 66.6 | 39 |
| 2018 | 5x112 | 66.6 | 39 |
| 2019 | 5x112 | 66.6 | 39 |
| 2020 | 5x112 | 66.6 | 39 |
| 2021 | 5x112 | 66.6 | 30-45 |
| 2022 | 5x112 | 66.6 | 30-45 |
| 2023 | 5x112 | 66.6 | 30-45 |
| 2024 | 5x112 | 66.6 | 30-45 |
| 2025 | 5x112 | 66.6 | 35-45 |
| ▸ 2026 | 5x112 | 66.6 | 35-45 |
2026 Audi Q5 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi Q5, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW 430i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2016 BMW 5 Series | 66.5 mm (Exact) | 26 | B 14x1.25 (Cone) |
| 2025 BMW 530i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 540i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 550e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2019 BMW 6 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi Q5 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi Q5?
The 2026 Audi Q5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Audi Q5 have the same bolt pattern as the 2026?
The Audi Q5 uses the 5x112 pattern from 2009 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Audi Q5?
The OEM offset for the 2026 Q5 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2026 Audi Q5?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mm offset mean for the 2026 Q5?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Will wheels from another Audi fit my 2026 Q5?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →