2026 Audi Q6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi Q6 is 5x112. It has a center bore of 66.5 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi Q6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 Q6 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi Q6's 5x112 bolt pattern run (since 2025). Wheels from any 2025–2026 Audi Q6 are cross-compatible with the 2026 model.
Audi Q6 Bolt Pattern by Year
Looking for all generations? View the complete Audi Q6 (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the Q6's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2025 | 5x112 | 66.5 | 35-45 |
| ▸ 2026 | 5x112 | 66.5 | 35-45 |
2026 Audi Q6 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi Q6, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 Mercedes-Benz E-Class | 66.6 mm (Exact) | 39 | B 14x1.50 (Ball) |
| 2025 Mercedes-Benz EQB-Class | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQE-Class Sedan | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQE-Class SUV | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQS-Class Sedan | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz EQS-Class SUV | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi Q6 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi Q6?
The 2026 Audi Q6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 35-45mm.
What other years of Audi Q6 have the same bolt pattern as the 2026?
The Audi Q6 uses the 5x112 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Audi Q6?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2026 Audi?
The 2026 Q6 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2026 Audi Q6s use lug bolts or lug nuts?
The 2026 Q6 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2026 Audi Q6?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →