2024 Audi RS 6 Avant Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Audi RS 6 Avant is 5x112. It has a center bore of 66.5 mm, an offset range of 22-35, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2024 Audi RS 6 Avant Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 22-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2024 RS 6 Avant — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Audi RS 6 Avant's 5x112 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Audi RS 6 Avant are cross-compatible with the 2024 model.
Audi RS 6 Avant Bolt Pattern by Year
Looking for all generations? View the complete Audi RS 6 Avant (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the RS 6 Avant's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Audi RS 6 Avant Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2024 Audi RS 6 Avant, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW X6 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW X6 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW X7 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW XM | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW Z4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 McLaren 750S | 66.5 mm (Exact) | Front: +32mm, Rear: +40mm | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Audi RS 6 Avant — Frequently Asked Questions
What is the bolt pattern for a 2024 Audi RS 6 Avant?
The 2024 Audi RS 6 Avant uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 22-35mm.
What other years of Audi RS 6 Avant have the same bolt pattern as the 2024?
The Audi RS 6 Avant uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Audi?
The 2024 RS 6 Avant uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2024 Audi RS 6 Avant?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 22-35mm, and a center bore of at least 66.5mm (using hub rings if larger).
Do 2024 Audi RS 6 Avants use lug bolts or lug nuts?
The 2024 RS 6 Avant requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2024 Audi RS 6 Avant?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →