2017 Audi S5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Audi S5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 29 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 S5 — Year-Specific Fitment Context
The 2017 Audi S5 is in year 10 of 17 using the 5x112 pattern (2008–2024). Wheels from any 2008–2024 Audi S5 are cross-compatible with the 2017 model.
Audi S5 Bolt Pattern by Year
The table below shows how the S5's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x112 | 66.6 | 29 |
| 2009 | 5x112 | 66.6 | 29 |
| 2010 | 5x112 | 66.6 | 29 |
| 2011 | 5x112 | 66.6 | 29 |
| 2012 | 5x112 | 66.6 | 29 |
| 2013 | 5x112 | 66.6 | 29 |
| 2014 | 5x112 | 66.6 | 29 |
| 2015 | 5x112 | 66.6 | 29 |
| 2016 | 5x112 | 66.6 | 29 |
| ▸ 2017 | 5x112 | 66.6 | 29 |
| 2018 | 5x112 | 66.6 | 29 |
| 2019 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2017 Audi S5
The 2017 Audi S5 uses a 5x112 bolt pattern with a 66.6mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset is critical: the factory range is around 29mm; deviating more than ±5mm can cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Audi typically uses ball seats, but aftermarket wheels may require conical or flat seats. Mismatched lug nuts can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Audi S5 appears from 2008 to 2024 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 75.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.6mm to 57.1mm for many aftermarket wheels) to avoid vibrations.
- ✅ Re-torque lug nuts to 90 ft-lb after 50 miles of driving.
- ✅ Verify offset clearance: 29mm is optimal; lower offsets (e.g., 20mm) may require fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Audi S5 — Frequently Asked Questions
What is the bolt pattern for a 2017 Audi S5?
The 2017 Audi S5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 29mm.
What other years of Audi S5 have the same bolt pattern as the 2017?
The Audi S5 uses the 5x112 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 Audi S5?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2017 Audi S5?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 29mm, and a center bore of at least 66.6mm (using hub rings if larger).
Can I use spacers on my 2017 Audi S5?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
What is the factory wheel offset for a 2017 Audi S5?
The OEM offset for the 2017 S5 is typically around 29mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset