2007 Audi S6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Audi S6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 S6 — Year-Specific Fitment Context
The 2007 Audi S6 is in year 13 of 30 using the 5x112 pattern (1995–2024). Wheels from any 1995–2024 Audi S6 are cross-compatible with the 2007 model.
Audi S6 Bolt Pattern by Year
The table below shows how the S6's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| ▸ 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2010 | 5x112 | 57.1 | 42 |
| 2011 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2007 Audi S6
For your 2007 Audi S6, the 5x112 bolt pattern is shared across many Audi models (1995–2024). However, the 57.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 42mm offset is optimal for suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Audi uses ball seats, not conical. Improper lug nuts can loosen or damage the wheel. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi S6 appears from 1995 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50 miles of driving.
- ✅ Verify aftermarket wheels have a 57.1mm center bore or use hub-centric rings.
- ✅ Check brake caliper clearance when changing offset; the S6 has large brakes.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Audi S6 — Frequently Asked Questions
What is the bolt pattern for a 2007 Audi S6?
The 2007 Audi S6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Audi S6 have the same bolt pattern as the 2007?
The Audi S6 uses the 5x112 pattern from 1995 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the center bore of a 2007 Audi S6?
The factory center bore (hub bore) for the 2007 Audi S6 is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 Audi S6s use lug bolts or lug nuts?
The 2007 S6 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Audi fit my 2007 S6?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What is the factory wheel offset for a 2007 Audi S6?
The OEM offset for the 2007 S6 is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset