2008 Audi S6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Audi S6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 S6 — Year-Specific Fitment Context
The 2008 Audi S6 is in year 14 of 30 using the 5x112 pattern (1995–2024). Wheels from any 1995–2024 Audi S6 are cross-compatible with the 2008 model.
Audi S6 Bolt Pattern by Year
The table below shows how the S6's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| ▸ 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2010 | 5x112 | 57.1 | 42 |
| 2011 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2008 Audi S6
The 2008 Audi S6 uses a 5x112 bolt pattern with a 57.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibration. The factory offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues with the suspension and brakes. Always verify lug nut compatibility: the S6 requires ball-seat lug nuts with a 14x1.50 thread pitch. Using incorrect seat type (e.g., conical) can lead to wheel loosening. For safety, re-torque lug nuts after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi S6 appears from 1995 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50 miles of driving.
- ✅ Avoid wheels with offset below 35mm to prevent fender rubbing.
- ✅ Use hub-centric rings with 57.1mm inner diameter for aftermarket wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Audi S6 — Frequently Asked Questions
What is the bolt pattern for a 2008 Audi S6?
The 2008 Audi S6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Audi S6 have the same bolt pattern as the 2008?
The Audi S6 uses the 5x112 pattern from 1995 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What lug nut size does the 2008 Audi S6 use?
The 2008 Audi S6 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 42mm offset mean for the 2008 S6?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
What is the center bore of a 2008 Audi S6?
The factory center bore (hub bore) for the 2008 Audi S6 is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2008 Audi S6?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset