2014 Audi S7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Audi S7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 S7 — Year-Specific Fitment Context
The 2014 Audi S7 is in year 2 of 12 using the 5x112 pattern (2013–2024). Wheels from any 2013–2024 Audi S7 are cross-compatible with the 2014 model.
Audi S7 Bolt Pattern by Year
The table below shows how the S7's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2014 Audi S7
The 2014 Audi S7 uses a 5x112 bolt pattern with a 66.6mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 32mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify offset with test fitting. Lug nuts are M14x1.5 with a ball seat (R14). Using incorrect thread pitch or seat type can lead to wheel loosening. Re-torque after 50-100 miles. Cross-compatible with 2013-2024 Audi S7 models.
Historical Fitment Data Reference
In our dataset, Audi S7 appears from 2013 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 77.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.6mm to aftermarket bore) to avoid vibrations.
- ✅ Stick to offset 32mm ±5mm; lower offset pushes wheels outward, risking fender rub.
- ✅ Re-torque lug nuts to 90 ft-lbs after 50-100 miles; never use conical seat nuts on ball-seat wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Audi S7 — Frequently Asked Questions
What is the bolt pattern for a 2014 Audi S7?
The 2014 Audi S7 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 32mm.
What other years of Audi S7 have the same bolt pattern as the 2014?
The Audi S7 uses the 5x112 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What does 32mm offset mean for the 2014 S7?
An offset of 32mm means the wheel's mounting surface is 32mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
What is the factory wheel offset for a 2014 Audi S7?
The OEM offset for the 2014 S7 is typically around 32mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2014 Audi S7?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 32mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the PCD for a 2014 Audi S7?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 S7, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset