2016 Audi S7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Audi S7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 S7 — Year-Specific Fitment Context
The 2016 Audi S7 is in year 4 of 12 using the 5x112 pattern (2013–2024). Wheels from any 2013–2024 Audi S7 are cross-compatible with the 2016 model.
Audi S7 Bolt Pattern by Year
The table below shows how the S7's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2016 Audi S7
For the 2016 Audi S7, the bolt pattern is 5x112 with a critical center bore of 66.6mm. Aftermarket wheels must be hub-centric; if the bore is larger, use hub-centric rings to prevent vibrations and ensure proper load transfer. The offset is sensitive: stock is 32mm, but a range of 25-40mm is acceptable for most setups. Deviating too far can cause rubbing or clearance issues. Lug nuts are 14x1.50 with a ball seat (R13 ball seat). Never use conical (tapered) lug nuts, as they can damage the wheel or come loose. Always torque to 90 ft-lbs and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Audi S7 appears from 2013 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 77.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50 miles of driving to account for wheel seating.
- ✅ When using aftermarket wheels, verify the center bore is at least 66.6mm; use hub-centric rings if larger.
- ✅ Avoid offsets below 25mm to prevent tire rubbing on the fender, especially with wider tires.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Audi S7 — Frequently Asked Questions
What is the bolt pattern for a 2016 Audi S7?
The 2016 Audi S7 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 32mm.
What other years of Audi S7 have the same bolt pattern as the 2016?
The Audi S7 uses the 5x112 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Will wheels from another Audi fit my 2016 S7?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Do 2016 Audi S7s use lug bolts or lug nuts?
The 2016 S7 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2016 Audi S7 use?
The 2016 Audi S7 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 32mm offset mean for the 2016 S7?
An offset of 32mm means the wheel's mounting surface is 32mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset