2021 Audi S7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Audi S7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 S7 — Year-Specific Fitment Context
The 2021 Audi S7 is in year 9 of 12 using the 5x112 pattern (2013–2024). Wheels from any 2013–2024 Audi S7 are cross-compatible with the 2021 model.
Audi S7 Bolt Pattern by Year
The table below shows how the S7's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2021 Audi S7
For your 2021 Audi S7, the bolt pattern is 5x112 with a critical center bore of 66.5mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibrations and ensure proper load transfer. The offset range is tight: 30-45mm. Sticking to 35-40mm is safest for fender clearance and suspension geometry. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Audi uses a ball seat, not conical. Using incorrect lug nuts can cause wheel loosening or damage. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Audi S7 appears from 2013 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 77.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid spacers unless using hub-centric designs; they can alter offset and stress bearings.
- ✅ Check for brake caliper clearance with aftermarket wheels, as the S7 has large brakes.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Audi S7 — Frequently Asked Questions
What is the bolt pattern for a 2021 Audi S7?
The 2021 Audi S7 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi S7 have the same bolt pattern as the 2021?
The Audi S7 uses the 5x112 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What lug nut size does the 2021 Audi S7 use?
The 2021 Audi S7 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2021 Audi S7s use lug bolts or lug nuts?
The 2021 S7 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2021 Audi S7?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 S7, the PCD is 5x112.
How do I measure the bolt pattern on my 2021 Audi?
The 2021 S7 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset