2014 Audi SQ5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Audi SQ5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 39 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 SQ5 — Year-Specific Fitment Context
The 2014 model year marks the beginning of the Audi SQ5's 5x112 bolt pattern era, which continued through 2024 (11 consecutive years). Wheels from any 2014–2024 Audi SQ5 are cross-compatible with the 2014 model.
Audi SQ5 Bolt Pattern by Year
The table below shows how the SQ5's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2014 Audi SQ5
For your 2014 Audi SQ5, the bolt pattern is 5x112, but the critical spec is the 66.5mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 39mm, but aftermarket wheels with offsets from 30-45mm can fit depending on width. Always verify clearance with the brake calipers and fenders. Safety warning: Use only lug nuts with the correct thread pitch (14x1.50) and seat type. The SQ5 uses ball-seat lug nuts; using cone-seat nuts can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Audi SQ5 appears from 2014 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 66.5mm center bore exactly.
- ✅ Avoid spacers thicker than 5mm without extended studs to maintain proper thread engagement.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Audi SQ5 — Frequently Asked Questions
What is the bolt pattern for a 2014 Audi SQ5?
The 2014 Audi SQ5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 39mm.
What other years of Audi SQ5 have the same bolt pattern as the 2014?
The Audi SQ5 uses the 5x112 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Do 2014 Audi SQ5s use lug bolts or lug nuts?
The 2014 SQ5 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2014 Audi?
The 2014 SQ5 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 39mm offset mean for the 2014 SQ5?
An offset of 39mm means the wheel's mounting surface is 39mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
What lug nut size does the 2014 Audi SQ5 use?
The 2014 Audi SQ5 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset