2026 Audi SQ5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi SQ5 is 5x112. It has a center bore of 66.5 mm, an offset range of 34-39, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi SQ5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 34-39 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 SQ5 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi SQ5's 5x112 bolt pattern run (since 2014). Wheels from any 2014–2026 Audi SQ5 are cross-compatible with the 2026 model.
Audi SQ5 Bolt Pattern by Year
Looking for all generations? View the complete Audi SQ5 (2014–2026) Bolt Pattern & Generation Guide →
The table below shows how the SQ5's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x112 | 66.5 | 39 |
| 2015 | 5x112 | 66.5 | 39 |
| 2016 | 5x112 | 66.5 | 39 |
| 2017 | 5x112 | 66.5 | 39 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.5 | 39 |
| 2020 | 5x112 | 66.5 | 39 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
| 2025 | 5x112 | 66.5 | 34-39 |
| ▸ 2026 | 5x112 | 66.5 | 34-39 |
2026 Audi SQ5 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi SQ5, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Audi Q6 | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Audi Q6 e-tron | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2017 Audi Q7 | 66.5 mm (Exact) | 30 | B 14x1.50 (Ball) |
| 2025 Audi Q8 | 66.5 mm (Exact) | 20-35 | 14x1.5 (Ball) |
| 2024 Audi Q8 e-tron | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2024 Audi Q8 Sportback e-tron | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi SQ5 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi SQ5?
The 2026 Audi SQ5 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 34-39mm.
What other years of Audi SQ5 have the same bolt pattern as the 2026?
The Audi SQ5 uses the 5x112 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 66.5mm center bore important for the 2026 SQ5?
The 66.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2026 Audi SQ5?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Audi SQ5 use?
The 2026 Audi SQ5 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2026 Audi SQ5?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 34-39mm, and a center bore of at least 66.5mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →