2009 Bentley Brooklands Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Bentley Brooklands, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x160 |
|---|---|
| Lug Nut / Bolt Size | B 1/2" |
| Center Bore (CB) | 114.5 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 Brooklands — Year-Specific Fitment Context
The 2009 model year marks the beginning of the Bentley Brooklands's 5x160 bolt pattern era, which continued through 2010 (2 consecutive years). Wheels from any 2009–2010 Bentley Brooklands are cross-compatible with the 2009 model.
Bentley Brooklands Bolt Pattern by Year
The table below shows how the Brooklands's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2009 | 5x160 | 114.5 | 60 |
| 2010 | 5x160 | 114.5 | 60 |
5x160 Pattern Context
This bolt pattern appears on 80 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x160:
Expert Buying Guide for 2009 Bentley Brooklands
For your 2009 Bentley Brooklands, the 5x160 bolt pattern and 114.5mm center bore are critical. Aftermarket wheels require hub-centric rings to avoid vibration and ensure proper load distribution. The offset is sensitive; stick to 60mm ±5mm to maintain handling and clearance. Use only B 1/2" lug nuts with the correct thread pitch (1/2"-20) and ball seat—mixing seat types can cause wheel loosening. Always torque to manufacturer specs (140 ft-lbs) and re-torque after 50 miles. Avoid spacers unless hub-centric and verified for strength.
Historical Fitment Data Reference
In our dataset, Bentley Brooklands appears from 2009 to 2010 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for settling.
- ✅ Never use conical (cone) seat lug nuts on factory ball-seat wheels; use only ball-seat lug nuts.
- ✅ Check inner clearance for aftermarket wheels; the large brake calipers may require specific spoke designs.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Bentley Brooklands — Frequently Asked Questions
What is the bolt pattern for a 2009 Bentley Brooklands?
The 2009 Bentley Brooklands uses a 5x160 bolt pattern (also called lug pattern or PCD). The center bore is 114.5mm and the offset is 60mm.
What other years of Bentley Brooklands have the same bolt pattern as the 2009?
The Bentley Brooklands uses the 5x160 pattern from 2009 through 2010. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2009 Bentley?
The 2009 Brooklands uses a 5x160 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2009 Bentley Brooklands?
The OEM offset for the 2009 Brooklands is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 60mm offset mean for the 2009 Brooklands?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Bentley.
What is the center bore of a 2009 Bentley Brooklands?
The factory center bore (hub bore) for the 2009 Bentley Brooklands is 114.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset